EP1.x Electronic Stroke Limit Control | Warner Linear

The EP1.x Limit Switch control provides end of travel positioning through the use of a magnetic switch and motor mounted relay.

The EP1 limit switches are mounted in a channel on the actuator cover tube accessible below a durable cover. The EP1 switches are field adjustable.

The Electronic Stroke control package consists of the magnetic sensors and a motor mounted relay within an enclosure suited for harsh environments.

A Zener diode suppression is used on both input and outputs for added protection from electrical spikes. Unit reversing is achieved by reversing input power polarity to the motor.

Product Features

Power: 25 Amps max. @ 12 volts
12.5 Amps max. @ 24 volts

Operating Temperature: -20o F to +150o F (-29o C to 66o C)


EP1.0 - Standard Stoke Limit Control
EP1.1 - Same as P1.0 with two LEDs on the outside of the control module. LEDs indicate when end of travel has been reached.
EP1.2 - Same as P1.0 with two 12/24 volt, 0.5 Amps outputs that can be used to signal an external switch, relay, lamp or PLC input.
EP1.2LE - Two +5 VDC 25ma outputs plus a ground to provide a signal when end of travel is reached. This output can be used to power LEDs.
EP1.4 - Same as P1.0, end limit stopping with 0-10K ohm potentiometer output.
EP1.5 - End limit stopping with end limit outputs and 0-10K potentiometer outputs.

Product Data Sheets

  • p-1581-wl_ep1x_electronic_stroke_limit_control
Click on image below to download pdf. To order hard copies of literature click here.

Product Catalog

  • Electric Actuators and Actuator Controls

Related Literature

  • Warner Linear Line Card

Product News

Contact Info

Warner Linear
31 Industrial Park Road
New Hartford, CT 06057 - USA
Toll Free: 1-800-825-6544
Phone: 815-389-3771
Fax: 815-389-2582
Email: info@warnerlinear.com

Warner Linear (France)
7, rue Champfleur, B.P. 20095
St Barthelemy d’Anjou - France
Phone: +33 (0)2 41 21 24 24
Fax: +33 (0)2 41 21 24 70
Email: info.eu@warnerlinear.com

Warner Linear P1 EP1 and P2DC Control