SubMenu Actuator Controls

Simple Switch Box Controls

All actuators are controlled using an external-retract-off switching function. The SBC-DC and the SBC-AC provide a simple mounted switch compatible with Warner Linear actuators.

SBC-DC

Power: Compatible with 12, 24 and 48 volt DC actuators
Function: Extend, retract, off via DPDT momentary toggle switch
Enclosure: ABS plastic enclosure 4.7” L x 3.2” W x 2.2” H (119.38mm L x 81.28mm W x 55.88mm H)
Input Cable: 12ft (3.66m), 2 wire, 14AWG cable with alligator clip ends
Output Cable: 1ft (.30m) cable provided. Designate connector appropriate to actuator being used
Optional extension cables are available in 5-25ft (1.524 - 7.62m) lengths

SBC-AC

Power: Compatible with 115 or volt VAC input
Function: Extend, retract, off via DPDT momentary toggle switch
Enclosure: 4.72” L x 4.72” W x 3.15” (119.89mm L x 119.89mm W x 80.01mm H) long dust tight enclosure
Protection: Externally mounted 5 amp fuse on outside of enclosure for easy replacement.
Input Cable: 6ft (1.829m) open ended tinned AC input cable provided
Output Cable: Sealed cable gland included for customer supplied output cable

Optional Extension and Control Power Cables

Power supplies include a 1ft (.30m) length cable to connect to actuator

Accessory cables may be ordered in lengths of 5, 10, 20 and 25 feet (1.524, 3.048, 6.096 and 7.62 meters) with the appropriate connector for the actuator selected. (mini-packard, Packard 56, Weatherpack, Deutsch)

Live Power (LP) cables are required to provide constant power to BTc Limit switch or potentiometer feedback circuits mounted on the actuator. LP cables provide two connectors.

Signal Cable (SC) cables provide the LP cable with two additional connectors for use with limit switch or potentiometer feedback.

Technical Product Data

Please refer to page 36 of the catalog (P-1581)