General Duty Actuator
Acme Screw
Up to 400 lbs. (182kg) Rated Load
Up to 1 in. (25.4mm)/sec. Travel Speed
Drive Type: Acme Screw
Load Capacity & Speed
lbs. @ in./sec. |
(kg@mm/sec) |
125 @ 1.0 |
(56@25) |
175 @ 0.75 |
(78@18) |
200 @ 0.50 |
(90@12) |
225 @ 0.62 |
(101@15) |
300 @ 0.33 |
(135@8) |
400 @ 0.25 |
(157@6) |
Stand. Stroke Length in. (mm)
2, 4, 6, 8, 10, 12
(50, 100, 150, 200, 254, 300)
Input Voltage (vdc): 12, 24
|
S-Track
Intended for general duty applications with need for controllability and quieter operation.
Features
- The end limits are factory set to the maximum allowable stroke of the actuator
- The current and temperature of the motor are monitored at all times and power will be removed from the motor when exceeded to protect components from failure
- Through the 8-pin molded connector there are several standard input and output features to monitor the operation of the actuator
- There is a 0-10 VDC position output that follows linearly with the position of the actuator and is offered in many different voltages and currents
- There is also end of stroke limit outputs which indicate when the actuator reaches the fully retracted and extended positions
- These outputs can be set at the factory as, active low or active high independently and are good for up to 1 amp
- To maintain all of these output signals when switched power is off, a live power feature is available
Typical Applications:
Indoor Office Equipment
Medical
Deck Lifts
Gate Openers |
