Power Lift Actuator
DC Motor – Acme or Ball Screw
Up to 2,200 lbs. (998kg) Rated Load
Up to 2.1 in.(53.34mm)/sec. Travel Speed
Shown with optional direct drive manual
override feature without protective cap.
B-Track K2PL/K2XPL
B-Track Power Lift models are modified K2 or K2x actuators. Power Lift units utilize all the standard components and retain all the performance features of the K2 family, without the external cover tube. This allows the Power Lift actuator features to be integrated into a variety of customer designed structures, where a cover tube is not needed.
Extended gear box screws are provided allowing easy attachment to a customer frame. A straight through manual override option is available as shown above. Suggested for tension applications only. Consult factory for compression loading applications.
|
Features
- Protective coatings and O-ring seals throughout
- Efficient in-line load system
- Patented hybrid nut and screw design, no brake needed in K2 model.
- Integral load holding brake on K2x model
- Ball detent over load clutch
- 4 to 24 inches (100 to 600 millimeters) stroke lengths
- Up to 2200 pounds (998
kilograms) load capacities
- Speeds up to 2.1 inches
(53.34 millimeters)/sec. travel
- Thermal overload incorporated into the motor
- Heavy wall construction
- Double ball bearing motors and heat treated gears
- Optional 90 vdc motor for use with SBC-AC control
- Custom mounting options
available
Typical Applications:
Wheelchair and scooter lifts
Traffic signs
Beds and tables
Light masts
|
